Skoda Felicia

Since 1994 of release

Repair and car operation



Shkoda Felitsija
+ Cars of mark Skoda Felicia
+ The maintenance instruction
+ Routine maintenance
+ Engine repair
+ Systems of cooling, heating
+ The power supply system
+ Engine electric equipment
+ Coupling
+ Transmission
+ Power shafts
- Brake system
   The general information
   System design, the description of separate knots and mechanisms
   Prorolling of hydraulic system
   Replacement of hoses and tubes of a hydraulic path of brake system
   Replacement колодок disk brake mechanisms of forward wheels
   Replacement of boots of drum-type brake mechanisms of back wheels
   Condition check, removal and installation of disks of forward brake mechanisms
   Removal, check of a condition and installation of drums of brake mechanisms of back wheels
   Removal, major repairs and installation of supports of brake mechanisms of forward wheels
   Removal, major repairs and installation of wheel cylinders of back brake mechanisms
   Removal, major repairs and installation of the main brake cylinder (ГТЦ)
   Removal and installation of a pedal of a foot brake
   Check of serviceability of functioning, removal and installation of the vacuum amplifier of brakes
   Removal, check of a condition and installation of the control valve of the vacuum amplifier of brakes from a hose
   Adjustment of a lay brake
   Removal and installation of the lever of a lay brake
   Removal and installation of cables of a drive of a lay brake
   Check of serviceability of functioning, removal and installation of the valve-regulator of pressure in hydraulic contours of brake mechanisms of back wheels
   Removal, installation and adjustment of the gauge-switch of stoplights
   System of antiblocking of brakes (ABS) - the general information
   Removal and installation of components of systems ABS
   Removal and installation of the vacuum pump (diesel models)
   Check of a condition and major repairs of the vacuum pump (diesel models)
+ Suspension bracket and steering
+ Body and salon furnish
+ Onboard electric equipment



The general information

At service of any of components of brake system it is necessary to operate extremely accurately, methodically carrying out all procedures described in the present Management in proper order. At works with components of a hydraulic path it is necessary for cleanliness observance to give special attention. In the absence of confidence of correctness of an estimation of a condition of components, without reflecting make their replacement (in the complete set for the given axis of the car). As replaceable use only firm details of manufacture of company Skoda, or not conceding to them on quality.


All models are equipped by 2-planimetric brake system of hydraulic type with vacuum strengthening. The main brake cylinder (ГТЦ) has a dual design. Contours of hydraulic system function independently, i.e. in default one of them, the second continues to provide adequate braking of the car by two wheels. In normal conditions both brake contours function in a unison. The system of antiblocking of brakes (ABS) is included into a standard complete set of some models, on the other can be established in addition (see more in detail Has undressed Removal and installation of components of systems ABS).

Brake mechanisms of forward wheels on all models have a disk design. Back wheels are equipped by drum-type brake mechanisms. Supports of disk brake mechanisms have an one-piston design with floating скобой, providing uniformity of distribution of effort between two brake колодкам. In drums of brake mechanisms of back wheels the forward and back boots put in action by the 2-piston wheel cylinder are placed. The special adjusting mechanism automatically compensates deterioration of frictional overlays at the expense of updating of position of boots.

On not equipped ABS models the pressure valve-regulator is included in a hydraulic contour of back brake mechanisms. The valve can react to change as pressure in a contour, and degrees of loading of the car, and in the first case two valves (on one on everyone their wheels), rolled directly in ГТЦ, and in the second - one, fixed on a body of the car and connected to the back bridge a spring are used. Valve-regulator presence (ов) allows system to correct in due time pressure in hydraulic contours of brake mechanisms of back wheels, preventing thereby premature blocking of the last at sharp braking.

The lay brake has an independent mechanical drive and influences back wheels of the car.