Skoda Felicia

Since 1994 of release

Repair and car operation



Shkoda Felitsija
+ Cars of mark Skoda Felicia
+ The maintenance instruction
+ Routine maintenance
+ Engine repair
+ Systems of cooling, heating
+ The power supply system
+ Engine electric equipment
+ Coupling
+ Transmission
+ Power shafts
+ Brake system
- Suspension bracket and steering
   The general information and safety measures
   Removal and installation ступичных assemblages of forward wheels
   Replacement of bearings of forward wheels
   Removal and installation of racks of a forward suspension bracket
   Major repairs of racks of a forward suspension bracket
   Removal, major repairs and installation of the bottom levers of a forward suspension bracket
   Replacement of spherical support of the bottom levers of a forward suspension bracket
   Removal and installation of the stabilizer of cross-section stability of a forward suspension bracket
   Removal and installation of racks of a bar of the stabilizer of cross-section stability of a forward suspension bracket
   Removal and installation of a forward stretcher
   Replacement of bearings of back naves
   Removal, major repairs and installation of racks of a back suspension bracket
   Major repairs of racks of a back suspension bracket
   Removal, major repairs and installation of pins of the back bridge
   Removal and installation of the back stabilizer of cross-section stability
   Removal and installation of the back bridge
   Removal and steering wheel installation
   Removal and installation of a steering column
   Major repairs of a steering column
   Removal and installation of assemblage of the lock of ignition/blocking of a wheel
   Removal, major repairs and installation of the steering mechanism
   Replacement of rubber protective covers картера the steering mechanism
   Removal of air stoppers from a hydraulic path of system of strengthening of a wheel
   Removal and installation of the helmsman наcоса
   Removal and installation of external tips of steering draughts
   Removal and installation of steering draught
   Corners of installation of wheels of the car - the general information
+ Body and salon furnish
+ Onboard electric equipment



Removal, major repairs and installation of racks of a back suspension bracket

At assemblage the new nut of the bottom fixing bolt is required.

REMOVAL

 PERFORMANCE ORDER

1. For providing of access to the top support of a rack of a back suspension bracket on models of Hetchbek liberate from clamps and remove the lateral panel of an upholstery from the corresponding party of a luggage space.

2. On models the Versatile person remove a decorative cover of the panel of a lateral upholstery from the corresponding party of a luggage space, then give the top and bottom screws of fastening of the panel. Liberate from clamps and unbend back a carpet covering.

3. On all models prop up wedges forward wheels, then поддомкратьте a back of the car and establish it on props. Remove a corresponding back wheel.

4. In a luggage space remove a protective cap of the top support of a rack of a suspension bracket, then give a fixing nut and remove a washer. Trying to remember adjusting position of each of components, remove тарельчатую a washer, a rubber pillow of a support, ring and remote plugs.

5. From under the car give a nut and take a bolt of the bottom support of a rack. Remove a rack.

At assemblage the nut of a fixing bolt is subject to replacement without fail. Check up a rubber pillow of the top support on presence of signs of ageing of a material and mechanical damages. In case of need make replacement.

INSTALLATION

 PERFORMANCE ORDER

1. Get a rack on the regular place, having tracked correctness of its arrangement rather кузовных elements. Insert a through bolt of the bottom support, screw a nut, having tightened while only by hand.
2. In a luggage space establish on a rack remote and ring plugs, then a rubber pillow and тарельчатую a washer.
3. Establish a washer, screw the top fixing nut and tighten it with demanded effort. Establish a protective cap of the top support of a rack, then return into place the decorative panel of a lateral upholstery of a luggage space.

4. Establish into place a wheel, then lower the car on the earth and tighten with demanded effort wheel bolts. Shake the car for усадки rack components, then tighten with demanded effort a nut of a bolt of fastening of the bottom support of a rack.