Skoda Felicia

Since 1994 of release

Repair and car operation



Shkoda Felitsija
+ Cars of mark Skoda Felicia
+ The maintenance instruction
+ Routine maintenance
+ Engine repair
+ Systems of cooling, heating
+ The power supply system
+ Engine electric equipment
+ Coupling
+ Transmission
+ Power shafts
+ Brake system
+ Suspension bracket and steering
- Body and salon furnish
   The general information and safety measures
   Care of components of a body and the car bottom
   Care of an upholstery and carpet coverings of salon
   Repair of insignificant damages кузовных panels
   Repair seriously damaged кузовных panels
   Removal and installation of a forward bumper
   Removal and installation of a back bumper
   Removal, installation and cowl adjustment
   Removal and installation drive a cable отпускания the cowl lock
   Removal, installation and adjustment of assemblage of the lock of a cowl
   Removal and installation of doors
   Removal and installation of panels of an internal upholstery of doors
   Removal and installation of door handles and lock components
   Removal and installation of door glasses and regulators Glass lifts
   Removal and installation of a door of a back and its persistent bars
   Removal, installation and adjustment of components of the lock of a door of a back
   Removal and installation of components of the uniform lock
   Removal and installation of components of the electric drive Glass lifts
   Removal and installation of external rear-view mirrors and accompanying components
   Windscreen and glass of a door of a back - the general information
   The top hatch
   Removal and installation of elements кузовной furnish
   Removal and installation of seats
   The mechanism натяжителя a seat belt of a forward seat - the general information
   Removal and installation of components of seat belts
   Removal and installation of elements of furnish of salon
   Removal and installation of the central console
   Removal and installation of the panel of devices
   Control кузовные the sizes
+ Onboard electric equipment



Removal and installation of panels of an internal upholstery of doors

Components of assemblage of a forward door

1 — Poruchnevaja the handle
2 — the Screw
3 — the Internal handle
4 — Draught of a drive of an external mirror
5 — the Locations of clamps
6 — the Overlay
7 — the Button of deenergizing of the lock
8 — Izoljatsionnaja a film
9 — the Clamp

10 — the Panel of an internal upholstery
11 — the Pocket
12 — the Fixing flange of a loudspeaker
13 — the Loudspeaker
14 — the drive Handle window lifterа
15 — the Panel of decorative furnish
16 — the Washer
17 — the Protective cover
18 — the Screw

REMOVAL

 PERFORMANCE ORDER

The way of fixing and arrangement of fixture of the panel of an internal upholstery on a door varies depending on level of a complete set of the car and can differ from resulted in the present Section.

Disconnect a negative wire from the battery.


Forward door


 PERFORMANCE ORDER

1. Components of door assemblage are presented on an illustration.

2. On models with a manual drive Glass lifts having hooked, remove a decorative cover of the handle of podnimanija/lowering of glass. Turn out the fixing screw and remove the handle from a spindle. Remove a remote washer.

3. Turn out the button of deenergizing of a door-lock, having disconnected it from an executive rod.

4. Lift the internal handle of a door, then cautiously release clamps and remove from the handle the panel of decorative furnish.

5. Turn out fixing screws and remove the door handle from the panel of an internal upholstery. In case of need disunite a socket of electroconducting of the switch of the electric drive of a rear-view mirror as soon as access to it will open.

6. At a corresponding complete set remove a decorative cap and turn out the screw of fastening of the panel of an internal upholstery to a door.

7. Accurately hooking the panel, liberate it from clamps and separate from a doorframe. At a corresponding complete set liberate from the panel electroconducting and disunite its sockets.


Back door

 PERFORMANCE ORDER

1. Execute the procedures described in paragraphs with 2 on 5.
2. Accurately hooking the panel, liberate it from clamps and separate from a doorframe.

INSTALLATION

 PERFORMANCE ORDER

Installation is made upside-down. Before to latch the panel in clamps, make sure of correctness of a lining and продевании in the provided apertures of electroconducting (at a corresponding complete set).