Skoda Felicia

Since 1994 of release

Repair and car operation



Shkoda Felitsija
+ Cars of mark Skoda Felicia
+ The maintenance instruction
+ Routine maintenance
+ Engine repair
+ Systems of cooling, heating
+ The power supply system
+ Engine electric equipment
+ Coupling
+ Transmission
+ Power shafts
+ Brake system
+ Suspension bracket and steering
- Body and salon furnish
   The general information and safety measures
   Care of components of a body and the car bottom
   Care of an upholstery and carpet coverings of salon
   Repair of insignificant damages кузовных panels
   Repair seriously damaged кузовных panels
   Removal and installation of a forward bumper
   Removal and installation of a back bumper
   Removal, installation and cowl adjustment
   Removal and installation drive a cable отпускания the cowl lock
   Removal, installation and adjustment of assemblage of the lock of a cowl
   Removal and installation of doors
   Removal and installation of panels of an internal upholstery of doors
   Removal and installation of door handles and lock components
   Removal and installation of door glasses and regulators Glass lifts
   Removal and installation of a door of a back and its persistent bars
   Removal, installation and adjustment of components of the lock of a door of a back
   Removal and installation of components of the uniform lock
   Removal and installation of components of the electric drive Glass lifts
   Removal and installation of external rear-view mirrors and accompanying components
   Windscreen and glass of a door of a back - the general information
   The top hatch
   Removal and installation of elements кузовной furnish
   Removal and installation of seats
   The mechanism натяжителя a seat belt of a forward seat - the general information
   Removal and installation of components of seat belts
   Removal and installation of elements of furnish of salon
   Removal and installation of the central console
   Removal and installation of the panel of devices
   Control кузовные the sizes
+ Onboard electric equipment
Деревянные двери на заказ credit cards cvv


Removal and installation of door glasses and regulators Glass lifts

REMOVAL

 PERFORMANCE ORDER

Remove the panel of an internal upholstery of a door (see Has undressed Removal and installation of panels of an internal upholstery of doors).


Glass of a forward door

 PERFORMANCE ORDER

1. Turn out fixing screws, remove washers, disconnect the internal handle from an executive rod and remove it from a door.
2. Accurately separate from a door an upper edge изоляционной films for the purpose of providing of access to the regulator mechanism window lifterа.
3. Lower glass so that access to bolts of its fastening to a regulator through a special window in a doorframe has opened.

4. Accurately liberate the bottom sealing tape from a window aperture and remove it from a door.

5. Turn out four bolts of fastening of a windowpane to a regulator window lifterа, remove washers, then lift glass upwards and take it from a door.


The regulator mechanism window lifterа a forward door


 PERFORMANCE ORDER

1. Execute the procedures described in paragraphs with 2 on 4.

2. Mechanism components window lifterа are presented on an illustration. Turn out four bolts of fastening of glass to a regulator window lifterа, remove washers, then lift glass in the top position and glue its adhesive tape to a doorframe.

1 — the Cover
2 — Terminators of moving of glass
3 — the drive Handle window lifterа

3. On the models equipped with the electric drive Glass lifts, release a clamp and disunite an electroconducting socket drive the motor.
4. On all models give nuts of fastening of assemblage of a regulator to a doorframe, remove washers, then accurately take assemblage through the provided aperture.


Glass of a back door

 PERFORMANCE ORDER

1. Turn out screws of fastening of the internal handle of the lock, remove washers, then disconnect the handle from an executive rod of the lock and remove it from a door.
2. Accurately separate from a doorframe an upper edge изоляционной films for the purpose of providing of access to the regulator mechanism window lifterа.

3. Completely lower glass, then liberate from a doorframe the bottom sealing tape of a window aperture.

4. Give fastening screws to a door of a directing trench to a door, then take from a doorframe assemblage of a trench with the fixed glass of a back window leaf.

5. A marker lead round on perimetre of a washer of bolts of fastening of glass to a regulator window lifterа.
6. Turn out bolts of fastening of glass, remove washers, then lift glass upwards and take it from a doorframe.


The regulator mechanism window lifterа a back door

 PERFORMANCE ORDER

1. Mechanism components window lifterа are presented on an illustration. Execute the procedures described in paragraphs with 2 on 4.

1 — a handle Installation site
2 — the Cover
3 — Directing

2. A marker lead round washers of bolts of fastening of a windowpane to a regulator window lifterа.
3. Turn out bolts of fastening of glass to a regulator, remove washers, then lift glass in the top position and glue its adhesive tape to a doorframe.
4. Give nuts of fastening of assemblage of a regulator to a doorframe, remove washers, then accurately take assemblage through the provided aperture.

INSTALLATION

 PERFORMANCE ORDER

Installation is made upside-down. Pay attention to following moments:

a) Track correctness of installation of sealing tapes of window apertures;
b) At glass installation track correctness of its landing in directing trenches. Strongly tighten bolts of fastening of glass to a regulator;
c) Before to establish into place изоляционную a film and the panel of an internal upholstery of a door (see Has undressed Removal and installation of panels of an internal upholstery of doors), check up serviceability of functioning window lifterа. In case of need insignificant adjustment can be made by easing of fixing bolts and updating of position of glass on a regulator.