Skoda Felicia

Since 1994 of release

Repair and car operation


Shkoda Felitsija
+ Cars of mark Skoda Felicia
+ The maintenance instruction
+ Routine maintenance
+ Engine repair
+ Systems of cooling, heating
+ The power supply system
+ Engine electric equipment
+ Coupling
+ Transmission
+ Power shafts
+ Brake system
+ Suspension bracket and steering
+ Body and salon furnish
- Onboard electric equipment
   The general information and safety measures
   Search of causes of failures of an electric equipment
   Safety locks, the relay and breakers - the general information
   Removal and installation of switches
   Replacement of lamps of external lighting and alarm devices
   Replacement of lamps of internal lighting devices
   Removal and installation of assemblages of external lighting and alarm devices
   Adjustment of a direction of an optical axis of head headlights - the general information and replacement of the mechanism of a regulator
   Removal and installation of an instrument guard
   Removal and installation of a cable of a drive of a speedometer
   Removal and installation прикуривателя
   Removal and installation of a small horn of a horn
   Removal and installation of levers of screen wipers
   Removal and installation of the electromotor and draughts of a drive of cleaners of a windscreen
   Removal and installation of the electromotor of a drive of a cleaner of back glass
   Removal and installation of components of washers wind glasses/lenses of head headlights / back glass
   Removal and autoradio tape recorder installation
   Removal and installation of loudspeakers
   Removal and installation of the aerial of a radio receiver
   The anticreeping alarm system/system иммобилизации the engine
   Removal and installation of components of a heating system of forward seats
   Safety pillow - the general information, safety measures and system deactivation
   Removal and installation of components of system of pillows of safety
   Diagnostics of electronic control systems by the engine and safety systems
   + Schemes of electric connections


Replacement of lamps of internal lighting devices

The general information

Paragraph 1 see Replacement of lamps of external lighting and alarm devices Has undressed.

Forward салонный the fixture

 PERFORMANCE ORDER

1. Accurately having hooked a screw-driver, liberate the fixture from a ceiling upholstery of salon.

2. Open a cover and liberate a lamp фестонного type from spring contacts.

3. Installation is made upside-down. Track reliability of fixing of a lamp in spring contacts.


Back салонный the fixture

 PERFORMANCE ORDER

1. Having hooked a small screw-driver, remove плафонную a lens.
2. Liberate a lamp from contacts of the holder and take a fixture lamp.
3. Installation is made upside-down. Track reliability of fixing of a lamp in spring contacts.


Lantern of illumination of a luggage space

 PERFORMANCE ORDER

1. Accurately having hooked a small screw-driver, liberate the fixture from the panel of lateral furnish.

2. Liberate a lamp фестонного type from spring contacts.

3. Installation is made upside-down. Track reliability of fixing of a lamp in spring contacts.

Illumination of devices and control lamps

 PERFORMANCE ORDER

1. Remove an instrument guard (see Has undressed Removal and installation of an instrument guard).

2. For lamp removal turn assemblage of a corresponding cartridge counter-clockwise and take it from the panel of an instrument guard. Extraction of a lamp from a cartridge is not obviously possible. Cartridges of lamps are painted by capacity of 1.2 Vt in dark blue light, 2 Vt - in green.

3. Installation is made upside-down. The description of procedure of installation to the place of an instrument guard is resulted in Section Removal and installation of an instrument guard.


Illumination of the control panel by heater functioning

 PERFORMANCE ORDER

1. Remove an ashtray.

2. Accurately having hooked, remove from assemblage of management by heater functioning the facing panel.

3. Remove management handles, then facing of lamps.

4. Illumination lamps are equipped by socles of press type and simply extended from the nests.

5. Installation is made upside-down. Track reliability of fixing of lamps in contacts.