Since 1994 of release
Repair and car operation
+ Cars of mark Skoda Felicia
- The maintenance instruction
The panel of devices and controls
The equipment of the control panel and дефлекторов air lines, a choice of modes of functioning of system of heating/ventilation of salon - models with air conditioner
Adjustment of rear-view mirrors
Control lever РКПП
The salon equipment
+ Routine maintenance
+ Engine repair
+ Systems of cooling, heating
+ The power supply system
+ Engine electric equipment
+ Power shafts
+ Brake system
+ Suspension bracket and steering
+ Body and salon furnish
+ Onboard electric equipment
Курсы яхтенного капитана на www.freedom-sailing.com.|Старый оскол официальный сайт смотрите на http://vk.com.
Adjustment of rear-view mirrorsBefore to begin movement it is necessary to make sure of correctness of adjustment external and internal rear-view mirrors. The driver should have the adequate review in all three mirrors.
Possibility of transfer of an internal rear-view mirror in night position for the purpose of decrease in brightness of the reflected headlight of headlights of the following behind vehicles is provided. Transfer of a mirror from day position in night also is back made by means of located from below рычажка. Having pulled рычажок on itself, the driver translates a mirror in night position, having pushed from itself, returns in the day.
Position of external rear-view mirrors is regulated by means of the rotary lever located on the internal triangular panel of furnish of the basis of a mirror. The mirror is adjusted correctly when in it reflexion of a part of a board of a body of the car is visible. At a car parking in the limited space external mirrors necessarily can be pressed to glasses of doors.
On some models external rear-view mirrors are equipped by the electric drive of adjustment of position. The switch of management is built in by electric drive functioning in facing of the internal handle of a driver's door (see an accompanying illustration). The choice of a mirror subject to adjustment is carried out by means of buttons L (left) and R (right) (adjustment of mirrors see in the same place a case of refusal of the electric drive can be made manually.
Heating of external rear-view mirrors (if such function is provided) joins simultaneously with inclusion of heating of back glass.
Some external rear-view mirrors have a convex surface that allows to increase review sector, however conducts to certain reduction of reflected objects. For the given reason, precisely to estimate a distance to the following behind a vehicle through such mirrors it becomes inconvenient.
The electric drive Glass lifts
Switches of management Glass lifts are located by electric drive functioning on the central console behind control lever РКПП (see an accompanying illustration). By means of the left keyboard switch lowering and поднимание glasses of the left forward door is made. By means of the right switch - glasses of the right forward door. The drive window lifterа operates only at the included ignition, however continues to function during about 10 minutes after its deenergizing.
Both glasses open automatically by short-term keeping of a key of the corresponding switch in position (2) (see an illustration). At repeated нажимании on a key glass lowering immediately stops.
At instant нажимании on a key the window is slightly opened approximately on 15 see
Closing of glasses is made similarly, however this time keys should be wrung out in position (1). All other features of functioning of a drive remain.
At connection of the storage battery after its detachment it is necessary to make adjustment of the top position of glasses. If the window is closed, it is necessary to press the button of the corresponding switch and to keep it in position (1) within nearby 3 seconds. If the window is opened, it is necessary to close its short-term pressing of the switch, and then within 3 seconds to keep a key in position (1).
In the winter lowering and поднимание glasses is made with the raised resistance that speaks formation glass of hoarfrost or an ice crust. Glass thus can stop and come back in a starting position. Successfully to close a window in such situation, wring out a key of the corresponding switch in position (1) and detain her in it (ignition is included). If glass stops again, repeat attempt. The pause between separate отжиманиями should make keys no more than 5 seconds. And during it performance of any other operations is not supposed.