+ Cars of mark Skoda Felicia
+ The maintenance instruction
+ Routine maintenance
- Engine repair
+ Repair without extraction from the car of the petrol engine of 1.3 l
- Repair without extraction from the car of the petrol engine of 1.6 l
The description of the basic knots and mechanisms
Reduction of the piston of the first cylinder in position of the top dead point (ВМТ) the end of a step of compression
Check компрессионного pressure - an order of carrying out and interpretation of results
Removal and installation of a belt of drive ГРМ and its covers
Removal, check of a condition and installation of cogwheels and натяжителя a belt of drive ГРМ
Removal, installation and adjustment of effort of a tension of a belt of a drive of auxiliary units
Removal and installation of a cover of a head of cylinders
Replacement of an epiploon of a camshaft
Replacement of epiploons of a cranked shaft
Removal and installation of a head of cylinders in gathering with the inlet pipeline and a final collector
Check of serviceability of functioning of hydraulic pushers
Removal, check of a condition and flywheel installation
Check of a condition and replacement of support of the power unit
Removal and pallet installation картера the engine
Removal and installation of the oil pump and маслозаборника
+ Repair without extraction from the car of the diesel engine
+ Dismantle of the power unit and engine major repairs
+ Systems of cooling, heating
+ The power supply system
+ Engine electric equipment
+ Power shafts
+ Brake system
+ Suspension bracket and steering
+ Body and salon furnish
+ Onboard electric equipment
Repair without extraction from the car of the petrol engine of 1.6 l
Instructions for use a material of the Head
The given Part of the Head is devoted repair of the engine of 1.6 l, not connected with its extraction from the car (in situ).
The description большей parts of considered procedures is made, proceeding from the assumption that the power unit remains on the regular place in an impellent compartment of the car. In view of told, in a case if the engine is already dismantled and established on a workbench or the assembly stand, many of described steps should be lowered.
Let's notice that despite physical possibility of performance of repair in situ such components as shatunno-piston groups, this sort of works are usually made after dismantling of the engine in view of necessity of carrying out of some auxiliary procedures, not to mention requirements to observance of cleanliness of details and absolute passableness маслотоков.
The general description of the engine
The considered engine concerns family of 4-cylinder petrol engines with рядным placing of cylinders and the top arrangement of a camshaft (OHC). The engine is established cross-section in a forward part of the car. Transmission and coupling assemblages are in the left part of the power unit. On a design the engine is similar to the engine considered above of 1.3 l.
The block of cylinders is made of pig-iron moulding, a head - from an aluminium alloy. In a head the camshaft which drive is carried out by a zubchato-belt drive from a cranked shaft is established. In запрессованные in a head body directing plugs are planted inlet and final valves. Closing of each of valves occurs at the expense of the effort developed by a unique screw spring. Camshaft cams influence valves directly through the hydraulic pushers planted in individual nests. Oil giving in hydrojacks and for greasing of pushers is carried out through the heads cast in a body маслотоки.
The cranked shaft is established in five radical bearings. The bearing established between the second and third cylinders, is persistent and supervises axial люфт a shaft.
Circulation of a cooling liquid occurs at the expense of functioning of the water pump put in action from газораспределительного of a belt. Details by a principle of functioning of system of cooling can be obtained from materials of the Head of System of cooling, heating.
The compulsory system of greasing of the engine is organised by means of the pump put in action by individual chain transfer from a cranked shaft. The fence of oil from the pallet картера is carried out through equipped with the mesh filter маслозаборник. Before giving in a contour of greasing of the engine oil is banished through established outside полнопоточный the oil filter of replaceable type. Having passed through the filter, oil arrives in a head of cylinders where it is used for greasing подшипниковых necks of a camshaft and hydraulic pushers of valves, and further, in картер the engine, to radical and шатунным to bearings, piston fingers and mirrors of cylinders.
The list of the repair procedures, which performance does not demand extraction of the engine from the car
Procedures of repair and the engine service which performance can be made in situ are more low listed:
a) Removal and installation of a belt of a drive of auxiliary units;
b) Removal and camshaft installation;
c) Removal and installation of an epiploon of a camshaft;
d) Removal installation of a cogwheel of a camshaft;
e) Removal and installation of the water pump (see the Head of System of cooling, heating);
f) Replacement of epiploons of a cranked shaft;
g) Removal and installation of a cogwheel of a cranked shaft;
h) Removal and installation of a head of cylinders;
i) Check of a condition and replacement of support of a suspension bracket of the power unit;
j) Removal and installation of assemblage of the oil pump with маслозаборником;
k) Removal and pallet installation картера;
l) Removal, check of a condition and installation of a belt of drive ГРМ from cogwheels and a forward cover.