Skoda Felicia

Since 1994 of release

Repair and car operation



Shkoda Felitsija
+ Cars of mark Skoda Felicia
+ The maintenance instruction
+ Routine maintenance
- Engine repair
   + Repair without extraction from the car of the petrol engine of 1.3 l
   - Repair without extraction from the car of the petrol engine of 1.6 l
      The description of the basic knots and mechanisms
      Reduction of the piston of the first cylinder in position of the top dead point (ВМТ) the end of a step of compression
      Check компрессионного pressure - an order of carrying out and interpretation of results
      Removal and installation of a belt of drive ГРМ and its covers
      Removal, check of a condition and installation of cogwheels and натяжителя a belt of drive ГРМ
      Removal, installation and adjustment of effort of a tension of a belt of a drive of auxiliary units
      Removal and installation of a cover of a head of cylinders
      Replacement of an epiploon of a camshaft
      Replacement of epiploons of a cranked shaft
      Removal and installation of a head of cylinders in gathering with the inlet pipeline and a final collector
      Check of serviceability of functioning of hydraulic pushers
      Removal, check of a condition and flywheel installation
      Check of a condition and replacement of support of the power unit
      Removal and pallet installation картера the engine
      Removal and installation of the oil pump and маслозаборника
   + Repair without extraction from the car of the diesel engine
   + Dismantle of the power unit and engine major repairs
+ Systems of cooling, heating
+ The power supply system
+ Engine electric equipment
+ Coupling
+ Transmission
+ Power shafts
+ Brake system
+ Suspension bracket and steering
+ Body and salon furnish
+ Onboard electric equipment


Replacement of an epiploon of a camshaft

 PERFORMANCE ORDER

1. Remove a belt of a drive of auxiliary units (see Has undressed Removal, installation and adjustment of effort of a tension of a belt of a drive of auxiliary units).
2. Remove covers газораспределительного a belt, a pulley of a cranked shaft, result the piston of the first cylinder in position ВМТ of the end of a step of compression. (Sections Reduction of the piston of the first cylinder in position of the top dead point (ВМТ) the end of a step of compression, Removal and installation of a belt of drive ГРМ and its covers, Removal, check of a condition and installation of cogwheels see and натяжителя a belt of drive ГРМ), remove газораспределительный a belt, натяжитель and a camshaft cogwheel (see Has undressed Removal, check of a condition and installation of cogwheels and натяжителя a belt of drive ГРМ).

3. Turn out fixing bolts...

. Also remove a back (internal) cover газораспределительного a belt.

. Under a cover the camshaft epiploon is located.

4. Take a camshaft epiploon.
5. Without applying any solvent, dry неворсящейся rags wipe walls of a nest of an epiploon and a surface of a pin of a camshaft. Polish surfaces, having removed with all of them agnails, teases and the roughnesses, capable to lead to damage of a new epiploon.
6. Grease with pure impellent oil of a sponge of a new epiploon, then put on last a camshaft pin.
7. By means of a hammer and approaching on the size оправки (оправка should rest only against firm external edge of an epiploon) perpendicularly plant an epiploon in a casing nest.
8. Establish an internal cover газораспределительного a belt on a head of cylinders and tighten bolts of its fastening with demanded effort.
9. Establish into place removed components (Sections Reduction of the piston of the first cylinder in position of the top dead point (ВМТ) the end of a step of compression, Removal and installation of a belt of drive ГРМ and its covers see, Removal, check of a condition and installation of cogwheels and натяжителя a belt of drive ГРМ).
10. Adjust a tension auxiliary drive a belt (see Has undressed Removal, installation and adjustment of effort of a tension of a belt of a drive of auxiliary units).