Skoda Felicia

Since 1994 of release

Repair and car operation

Shkoda Felitsija
+ Cars of mark Skoda Felicia
+ The maintenance instruction
+ Routine maintenance
- Engine repair
   + Repair without extraction from the car of the petrol engine of 1.3 l
   + Repair without extraction from the car of the petrol engine of 1.6 l
   - Repair without extraction from the car of the diesel engine
      The description of the basic knots and mechanisms
      Reduction of the piston of the first cylinder in position of the top dead point (ВМТ) the end of a step of compression
      Check of tightness of chambers of combustion
      Removal and installation of a belt of drive ГРМ and its covers
      Removal and installation натяжителя and cogwheels of a belt of drive ГРМ
      Removal, installation and adjustment of a tension of a belt of a drive of auxiliary units
      Removal and installation of a cover of a head of cylinders
      Replacement of an epiploon of a camshaft
      Replacement of an epiploon of an intermediate shaft
      Replacement of epiploons of a cranked shaft
      Removal and installation of a head of cylinders in gathering with the inlet pipeline and a final collector
      Check of serviceability of functioning of hydraulic pushers
      Flywheel - removal, check and installation
      Support of the power unit - check and replacement
      The pallet - removal, check and installation
      Removal and installation of the oil pump and assemblage маслозаборника
   + Dismantle of the power unit and engine major repairs
+ Systems of cooling, heating
+ The power supply system
+ Engine electric equipment
+ Coupling
+ Transmission
+ Power shafts
+ Brake system
+ Suspension bracket and steering
+ Body and salon furnish
+ Onboard electric equipment

The pallet - removal, check and installation



1. Disconnect a negative wire from the battery.
2. Merge impellent oil.
3. Park the car on an equal horizontal surface, whenever possible with a firm covering. Cock a lay brake and prop up wedges back wheels.
4. Поддомкратьте redock of the car also establish it on props.
5. Moving on pallet perimetre, in stages ослабьте also turn out fixing bolts (for отдавания two bolts located from outside of transmission it is required карданный a drive to a face key).
6. Обстучав a palm, separate the pallet from the block of cylinders and take it from under the car. Remove and will throw out an old lining. If it is provided маслоотражатель, its removal becomes possible only after dismantle of the oil pump.
7. Taking an opportunity, check up a condition and passableness of a tube and the mesh filter маслозаборника the pump. In case of need remove the pump (see Has undressed Removal and installation of the oil pump and assemblage маслозаборника) and clean (or replace) the mesh filter.



1. Carefully smooth out interfaced surfaces, completely having removed from them the rests of a material of an old lining or hermetic. Then wipe surfaces the rags moistened in acetone.
2. Having made sure of absoluteness of cleanliness and dryness of interfaced surfaces of the pallet and the block of cylinders, grease with their layer of hermetic.
3. Lay a new lining on an interfaced surface, then press the pallet to the block and screw fixing bolts. In stages in regular intervals tighten fixture of the pallet with demanded effort.
4. Fill in in the engine necessary quantity of engine oil of a demanded grade (Routine maintenance see the Head).
5. Connect a negative wire to the battery.