Skoda Felicia

Since 1994 of release

Repair and car operation



Shkoda Felitsija
+ Cars of mark Skoda Felicia
+ The maintenance instruction
+ Routine maintenance
+ Engine repair
+ Systems of cooling, heating
+ The power supply system
+ Engine electric equipment
+ Coupling
- Transmission
   The general information
   The description of knots and mechanisms
   Removal and installation of draughts of a drive of a gear change
   Replacement of epiploons
   Check of serviceability of functioning, removal and installation of the gauge-vyklju-chatelja of fires of a backing
   Removal and installation of the mechanism of a drive of a speedometer
   Removal and transmission installation
   Major repairs РКПП, dismantling and assemblage of knots and components
+ Power shafts
+ Brake system
+ Suspension bracket and steering
+ Body and salon furnish
+ Onboard electric equipment



Replacement of epiploons

Epiploons of power shafts

 PERFORMANCE ORDER

At assemblage the new lock ring of fastening of the internal hinge of a power shaft is required.

1. Cock a lay brake and prop up wedges back wheels. Поддомкратьте redock of the car also establish it on props. Remove a corresponding forward wheel.
2. Merge трансмиссионное oil, or prepare rags for gathering of the oil spilt in the course of replacement of an epiploon.

3. Liberate the internal end of a power shaft from a transmission, take him aside and tie up a wire to suspension bracket elements.

If it is necessary to disconnect both power shafts, it is necessary to take care of fixing of lateral gear wheels of differential to avoid risk of their loss. Having liberated the first shaft, pass a piece metal прутка or pipes in diameter about 26 mm in a nest under shaft landing in transmission differential. If necessary fix a core outside on картере transmissions an adhesive tape. If to prevent falling of lateral gear wheels in differential it is not possible, dismantle of a transmission and its delivery in a car-care centre workshop will be unique way of their extraction.

4. Accurately hook an old epiploon the big screw-driver with a flat sting and take it from the landing nest.

5. Carefully wipe walls of a landing nest, then slightly grease external sponges of a new epiploon with dense greasing. Fill a new epiploon in a nest (sponges inside) and accurately begin to knock it against the stop, in quality оправки having taken advantage of a face head of the suitable size or a piece of a pipe of the corresponding diameter.

Оправка should rest only against firm external edge of a face surface of an epiploon.

6. Make sure of correctness of landing of an epiploon in картере РКПП, then replace a lock ring of the internal hinge of a power shaft and fill last in differential.
7. If трансмиссионное oil merged, fill in in картер РКПП necessary quantity of fresh oil of a demanded grade. If опорожнения картера boxes it was not made, check up oil level. In case of need make corresponding updating.


Epiploon of an axis of plugs of a gear change

 PERFORMANCE ORDER

At assemblage the new cylindrical pin of fastening of a rod is required.

1. Park the car on an equal horizontal platform, whenever possible with a firm covering. Firmly cock a lay brake, then поддомкратьте redock of the car and establish it on props.
2. With трансмиссионного the end of a rod of a choice of transfers remove a fixing collar, having provided with that access to цилиндриче

The collar of a standard complete set at assemblage will replace more correctly screw or worm.

3. By means of a hammer and выколотки beat out a pin and disconnect a rod of a choice of transfers from an axis of plugs of switching. The old pin can be thrown out, as at assemblage it is subject to replacement without fail.
4. Remove a protective cover of an axis of plugs, then by means of a screw-driver or nippers with long sponges liberate an old epiploon картера РКПП and remove it from the rod end. Prepare for gathering of spilt oil - establish under картер boxes suitable drain capacity.

5. Check up a condensed surface of an axis on presence of the defects, capable to lead to an exit of a new epiploon out of operation. In case of need make polishing of a pin of an axis by a fine-grained emery paper. In case of revealing of serious damages the axis is subject to replacement.
6. Slightly grease external sponges of a new epiploon and accurately put on it an axis of plugs of a gear change. Moving an epiploon lengthways on an axis, plant it in a reception nest in картере РКПП. Track, behind correctness of landing of an epiploon on a persistent coat hanger.
7. Connect a rod of a choice of transfers to an axis of plugs of switching in РКПП and achieve combination of fixing apertures. A hammer begin to knock in apertures a new cylindrical pin and fix its collar of screw or worm type.
8. In summary make level updating трансмиссионного oils in a transmission


Epiploon of a primary shaft

 PERFORMANCE ORDER

1. Remove a transmission from the car and make dismantling of the mechanism of deenergizing of coupling (see Has undressed Removal, check of a condition and installation of the mechanism of deenergizing of coupling).

2. Turn out screws of fastening directing муфты выжимного the bearing of coupling and remove last from a pin of primary shaft РКПП. The remark: Муфта it can appear it is planted hardly enough, and its removal will demand certain efforts.

3. Accurately having hooked a screw-driver with a flat sting, take an old epiploon from the landing nest in assemblage directing муфты.
4. Check up a condensed surface of a pin of a shaft on presence of the defects, capable to lead to an exit of a new epiploon out of operation. In case of need make polishing of a pin by a fine-grained emery paper. In case of revealing of serious damages the shaft is subject to replacement.
5. Dip a new epiploon in pure oil and accurately plant it in a reception nest in a back part directing муфты выжимного the bearing (sponges outside, i.e. - towards a transmission).
6. Once again wipe a pin of a primary shaft, grease with its dense greasing, then accurately plant муфту with the epiploon planted in it on the regular place. Densely press муфту to a surface of boat РКПП, then screw fixing screws and tighten them with demanded effort.