Skoda Felicia

Since 1994 of release

Repair and car operation



Shkoda Felitsija
+ Cars of mark Skoda Felicia
- The maintenance instruction
   Keys
   The panel of devices and controls
   The equipment of the control panel and дефлекторов air lines, a choice of modes of functioning of system of heating/ventilation of salon - models with air conditioner
   Adjustment of rear-view mirrors
   Control lever РКПП
   The salon equipment
   Seat belts
   Operation receptions
   Trailer towage
   Fuelling
+ Routine maintenance
+ Engine repair
+ Systems of cooling, heating
+ The power supply system
+ Engine electric equipment
+ Coupling
+ Transmission
+ Power shafts
+ Brake system
+ Suspension bracket and steering
+ Body and salon furnish
+ Onboard electric equipment
Какой ноутбук выбрать для себя? http://computersclub.ru/viewtopic.php?t=848 - ComputersClub.ru Сегодня люди пишут бокалы из хрусталя


Control lever РКПП

The gear change scheme is put from above on the handle of control lever РКПП.

Reverse gear inclusion is obviously possible only after a full stop of the car. If the engine is started, the reverse gear choice is supposed only after long enough pause during which the coupling pedal should be kept completely squeezed out.

The reverse gear choice at the included ignition leads to operation of white signal lights of the back combined lanterns.

It is not necessary to hold a hand on the handle of control lever РКПП during car movement. Pressure is told by a created hand to a gear change plug that can lead to premature deterioration of last.


Pedals

Freedom of moving of pedals should not be limited under no circumstances. On a car floor there should not be the extraneous subjects, capable to get under pedals. It is not necessary to stack on a floor in space under pedals any additional rugs.

At infringement of serviceability of functioning of brake system the course of a brake pedal can increase.

Coupling and gas pedals should move within all car of a course provided by a design.

At release all pedals should come back freely in the top position.

The lever of a lay brake

Inclusion of a lay brake is made by firm raising located in space between forward seats of the lever. At a car parking on a bias besides a lay brake it is necessary to switch off the first/reverse gear also.

Ignition inclusion at the cocked lay brake is accompanied by operation of the corresponding control lamp established in an instrument guard.

For отпускания a lay brake pull the lever upwards and press the button built in in its handle. Now the lever can be freely lowered in the bottom position.