Skoda Felicia

Since 1994 of release

Repair and car operation



Shkoda Felitsija
+ Cars of mark Skoda Felicia
+ The maintenance instruction
+ Routine maintenance
+ Engine repair
- Systems of cooling, heating
   The general information and safety measures
   Detachment and replacement of hoses of system of cooling
   Removal, check of a condition and radiator installation
   Removal, check of serviceability of functioning and thermostat installation
   Check of serviceability of functioning, removal, installation, dismantling and assemblage of the fan of system of cooling
   Check of serviceability of functioning, removal and installation of electric switches and gauges of system of cooling
   Removal, installation, dismantling and assemblage of the water pump
   System of heating/ventilation of salon - the general information
   Removal and installation of components of system of heating/ventilation of salon
   Air central air - the general information and safety measures
   Removal and installation of components of a central air of air
+ The power supply system
+ Engine electric equipment
+ Coupling
+ Transmission
+ Power shafts
+ Brake system
+ Suspension bracket and steering
+ Body and salon furnish
+ Onboard electric equipment


Systems of cooling, heating

Specifications

The general parametres
The maximum pressure in system, a bar 1.2 ÷ 1.5
The thermostat
Opening temperature (approximately), °С
The opening beginning 85 ÷ 89
Full opening 103
The minimum degree of opening of the valve, mm 7
Multicostal приводной a belt
Manufacturers Contitech and Optibelt
Quantity of edges/lengths, mm
The engine of 1.3 l 4/950
The engine 1.3 with К/В 6/1680 (a drive of the generator, the water pump and compressor K/V)
The engine of 1.6 l 6/751
The engine of 1.6 l with К/В 6/1080
The engine of 1.6 l with PAS 6/1070
The engine of 1.6 l with К/В and PAS 6/1125
The diesel engine of 1.9 l 5/1219
Epiploons used in the water pump
The size, mm
“Simrax” * Ah10k-12E04 **
And (the Water pump (a longitudinal section)) see an illustration 73.2 ÷ 73.8
IN 19.3 ÷ 19.4
WITH 9.3 ÷ 9.9
“Crane” 106 C ***
And (the Water pump (a longitudinal section)) see an illustration 73.2 ÷ 73/8
IN 19.3 ÷ 19.4
WITH 10.32 ÷ 19.48
* Outwardly differs presence of the additional condensing varnish put on external diameter.
** Запрессовка it is made by means of adaptation MR1-503/1 (see Has undressed Removal and installation of components of system of heating/ventilation of salon)
*** Запрессовка it is made by means of adaptation MR1-503/2 (see Has undressed Removal and installation of components of system of heating/ventilation of salon)
Efforts of a tightening of carving connections Nanometer
The gauge-switch of the fan of system of cooling 40
The water pump
The petrol engine of 1.3 l
Casing nuts 20
Petrol engines of 1.6 l
Bolts of fastening of the pump 20
The diesel engine
Bolts of fastening of the pump to a casing 10
Bolts of a pulley of the pump 25
Bolts of fastening of a casing of the pump to the block 25
The bottom bolt of fastening ТНВД 25
Bolts of fastening of a cover of the thermostat 10