|
1. Prop up forward wheels, then поддомкратьте a back of the car and establish it on props.
2. Fast check of a residual thickness of frictional overlays of boots can be made through an aperture in a board of the brake mechanism - at a corresponding complete set take from an aperture the rubber plug through passage. The estimation of a thickness of an overlay is made by pressing to its lateral surface of the core which diameter is equal to the minimum admissible thickness of an overlay. In case of need take advantage of a pocket small lamp. At deterioration below an admissible limit of an overlay at least one of boots all four boots (on both back brake mechanisms) are subject to replacement.
3. For more detailed check of components of the brake mechanism (the Brake system see the Head) it is necessary to remove and clean a drum. |