|
1. Strongly cock a lay brake, then поддомкратьте redock of the car and establish it on props. Remove forward wheels.
2. The visual estimation of a residual thickness of frictional overlays can be made through provided in the case of a support an observation port. By means of a steel ruler measure a thickness of overlays together with metal substrates. Compare results of measurements to requirements of Specifications.
3. The estimation of a thickness колодок through a support observation port gives only approximate representation about degree of deterioration of frictional overlays. For more detailed studying Pads it is necessary to remove and carefully to clear. Serviceability of functioning of a support and a condition of a brake disk (the Head the Brake system more in detail see) can be simultaneously checked up.
4. In case of deterioration below an admissible limit of a frictional overlay at least of колодок to replacement all are subject to one four (in brake mechanisms of both forward wheels). The description of procedure of replacement колодок is resulted also in the Head Brake system.
5. In summary, establish to the place of a wheel and lower the car on the earth.
ONCE A YEAR, WITHOUT DEPENDENCE FROM RUN SIZE |