Skoda Felicia

Since 1994 of release

Repair and car operation



Shkoda Felitsija
+ Cars of mark Skoda Felicia
+ The maintenance instruction
+ Routine maintenance
+ Engine repair
+ Systems of cooling, heating
+ The power supply system
+ Engine electric equipment
+ Coupling
+ Transmission
+ Power shafts
- Brake system
   The general information
   System design, the description of separate knots and mechanisms
   Prorolling of hydraulic system
   Replacement of hoses and tubes of a hydraulic path of brake system
   Replacement колодок disk brake mechanisms of forward wheels
   Replacement of boots of drum-type brake mechanisms of back wheels
   Condition check, removal and installation of disks of forward brake mechanisms
   Removal, check of a condition and installation of drums of brake mechanisms of back wheels
   Removal, major repairs and installation of supports of brake mechanisms of forward wheels
   Removal, major repairs and installation of wheel cylinders of back brake mechanisms
   Removal, major repairs and installation of the main brake cylinder (ГТЦ)
   Removal and installation of a pedal of a foot brake
   Check of serviceability of functioning, removal and installation of the vacuum amplifier of brakes
   Removal, check of a condition and installation of the control valve of the vacuum amplifier of brakes from a hose
   Adjustment of a lay brake
   Removal and installation of the lever of a lay brake
   Removal and installation of cables of a drive of a lay brake
   Check of serviceability of functioning, removal and installation of the valve-regulator of pressure in hydraulic contours of brake mechanisms of back wheels
   Removal, installation and adjustment of the gauge-switch of stoplights
   System of antiblocking of brakes (ABS) - the general information
   Removal and installation of components of systems ABS
   Removal and installation of the vacuum pump (diesel models)
   Check of a condition and major repairs of the vacuum pump (diesel models)
+ Suspension bracket and steering
+ Body and salon furnish
+ Onboard electric equipment


Removal and installation of the lever of a lay brake

The lever of a drive of a lay brake

1 — the Lever
2 — the Handle
3 — a drive Spring отпускания a clamp
4 — the Button отпускания a clamp

5 — Draught of a drive отпускания a clamp
6 — the Doggie of the ratchet mechanism of a clamp
7 — Gear sector of the ratchet mechanism

REMOVAL

 PERFORMANCE ORDER

1. For the purpose of providing of access to a control lever a lay brake remove back section of the central console. On models without the console remove a decorative cover of the lever. The lever design is presented on an illustration.
2. Completely release counternuts, then, having weakened adjusting nuts, provide the maximum weak point both drivers cables. Take шплинт and liberate a plate of the equalizer from the lever.
3. Remove a lock ring of fixing of a rotary finger. Take a finger and remove assemblage of the lever from the car.

The worn out components of the ratchet mechanism can be replaced in an individual order.

INSTALLATION

 PERFORMANCE ORDER

1. Before installation make sure of correctness of placing of components of the ratchet mechanism. Slightly grease the mechanism and a nest under landing of an axial finger by universal greasing.
2. Get the lever on the regular place and insert an axial finger. Fix a finger a lock ring, having tracked correctness of its landing in the flute.
3. Connect to the lever a plate of the equalizer of a tension of cables and fix its new шплинтом.
4. Execute adjustment of a drive of a lay brake (the Section Adjustment of a lay brake see).