Skoda Felicia

Since 1994 of release

Repair and car operation



Shkoda Felitsija
+ Cars of mark Skoda Felicia
+ The maintenance instruction
+ Routine maintenance
+ Engine repair
+ Systems of cooling, heating
+ The power supply system
+ Engine electric equipment
+ Coupling
+ Transmission
+ Power shafts
- Brake system
   The general information
   System design, the description of separate knots and mechanisms
   Prorolling of hydraulic system
   Replacement of hoses and tubes of a hydraulic path of brake system
   Replacement колодок disk brake mechanisms of forward wheels
   Replacement of boots of drum-type brake mechanisms of back wheels
   Condition check, removal and installation of disks of forward brake mechanisms
   Removal, check of a condition and installation of drums of brake mechanisms of back wheels
   Removal, major repairs and installation of supports of brake mechanisms of forward wheels
   Removal, major repairs and installation of wheel cylinders of back brake mechanisms
   Removal, major repairs and installation of the main brake cylinder (ГТЦ)
   Removal and installation of a pedal of a foot brake
   Check of serviceability of functioning, removal and installation of the vacuum amplifier of brakes
   Removal, check of a condition and installation of the control valve of the vacuum amplifier of brakes from a hose
   Adjustment of a lay brake
   Removal and installation of the lever of a lay brake
   Removal and installation of cables of a drive of a lay brake
   Check of serviceability of functioning, removal and installation of the valve-regulator of pressure in hydraulic contours of brake mechanisms of back wheels
   Removal, installation and adjustment of the gauge-switch of stoplights
   System of antiblocking of brakes (ABS) - the general information
   Removal and installation of components of systems ABS
   Removal and installation of the vacuum pump (diesel models)
   Check of a condition and major repairs of the vacuum pump (diesel models)
+ Suspension bracket and steering
+ Body and salon furnish
+ Onboard electric equipment
брендовые мужские кожаные куртки


Removal and installation of the vacuum pump (diesel models)

REMOVAL

 PERFORMANCE ORDER

1. The vacuum pump is fixed at the left on a forward wall of the block of cylinders.
2. Release a collar and disconnect a vacuum hose of the top part of the pump.
3. Turn out a fixing bolt and remove from the block of cylinders a clamp of fastening of the pump.
4. Take the pump from the block of cylinders, remove a sealing ring.

At assemblage the sealing ring is subject to replacement without fail.

INSTALLATION

 PERFORMANCE ORDER

1. Establish on the pump a new sealing ring, slightly having greased it for simplification of landing.
2. Get the pump on the regular place. Track correctness of gearing of a groove приводной gear wheels with the doggie of a leading shaft.
3. Establish a clamp and tighten a fixing bolt with demanded effort.
4. Connect to the pump a vacuum hose and reliably fix its collar.