Skoda Felicia

Since 1994 of release

Repair and car operation



Shkoda Felitsija
+ Cars of mark Skoda Felicia
+ The maintenance instruction
+ Routine maintenance
+ Engine repair
+ Systems of cooling, heating
+ The power supply system
+ Engine electric equipment
+ Coupling
+ Transmission
+ Power shafts
+ Brake system
+ Suspension bracket and steering
+ Body and salon furnish
- Onboard electric equipment
   The general information and safety measures
   Search of causes of failures of an electric equipment
   Safety locks, the relay and breakers - the general information
   Removal and installation of switches
   Replacement of lamps of external lighting and alarm devices
   Replacement of lamps of internal lighting devices
   Removal and installation of assemblages of external lighting and alarm devices
   Adjustment of a direction of an optical axis of head headlights - the general information and replacement of the mechanism of a regulator
   Removal and installation of an instrument guard
   Removal and installation of a cable of a drive of a speedometer
   Removal and installation прикуривателя
   Removal and installation of a small horn of a horn
   Removal and installation of levers of screen wipers
   Removal and installation of the electromotor and draughts of a drive of cleaners of a windscreen
   Removal and installation of the electromotor of a drive of a cleaner of back glass
   Removal and installation of components of washers wind glasses/lenses of head headlights / back glass
   Removal and autoradio tape recorder installation
   Removal and installation of loudspeakers
   Removal and installation of the aerial of a radio receiver
   The anticreeping alarm system/system иммобилизации the engine
   Removal and installation of components of a heating system of forward seats
   Safety pillow - the general information, safety measures and system deactivation
   Removal and installation of components of system of pillows of safety
   Diagnostics of electronic control systems by the engine and safety systems
   + Schemes of electric connections



Removal and installation of an instrument guard

REMOVAL

 PERFORMANCE ORDER

1. Disconnect a negative wire from the battery (the prevention resulted in Section the General information and safety measures) see.

2. Find fixed on картере РКПП the end of a cable of a drive of a speedometer. Release a nut with накатом and disconnect a cable from a drive.

3. Remove a steering wheel (the Suspension bracket and a steering see the Head).
4. On models without safety pillows give the fixing screw and lower the bottom casing of a steering column, liberate it from a clamp and remove columns.
5. On all models turn out the fixing screw, lower clamps and remove the top casing of a column.

6. For the purpose of providing of access to the top screw of fastening of an instrument guard accurately hook a small screw-driver and remove plastic заглушку...

... (On some models instead of заглушки the display of a measuring instrument of temperature of external air) is established. Also remove a decorative cover from the central part of the guard built in in a casing дефлектора a ventilating air line.

7. For the purpose of providing of access to the bottom screws of fastening of a casing of a guard remove заглушки, established on each side both complete sets of the push-button switches located on the parties of a guard.

8. Turn out top and the bottom fixing screws and remove assemblage of a casing of an instrument guard In process of access opening, disunite the sockets of electroconducting located on the back party of a guard. Then release clamps and disconnect from a guard a cable of a drive of a speedometer.

9. In case of need release clamps and separate a combination of devices from a guard casing.

INSTALLATION

 PERFORMANCE ORDER

1. Get assemblage on the regular place and connect to it a cable of a drive of a speedometer and electroconducting sockets. Track reliability of fastening of sockets, then plant assemblage in the panel of devices.
2. Screw fixing screws and strongly tighten them. Establish into place all provided заглушки.
3. Establish into place the top casing of a steering column, track reliability of gearing of clamps and durability of a tightening of the fixing screw. On models without a safety pillow also establish the bottom casing of a column.
4. Establish into place a steering wheel (the Suspension bracket and a steering see the Head).
5. Connect a negative wire to the battery and check up serviceability of functioning of control lamps of an instrument guard.
6. If everything is all right, connect to РКПП приводной a speedometer cable, strongly having tightened a nut with накатом.