Skoda Felicia

Since 1994 of release

Repair and car operation



Shkoda Felitsija
+ Cars of mark Skoda Felicia
+ The maintenance instruction
+ Routine maintenance
+ Engine repair
+ Systems of cooling, heating
+ The power supply system
+ Engine electric equipment
+ Coupling
+ Transmission
+ Power shafts
+ Brake system
+ Suspension bracket and steering
- Body and salon furnish
   The general information and safety measures
   Care of components of a body and the car bottom
   Care of an upholstery and carpet coverings of salon
   Repair of insignificant damages кузовных panels
   Repair seriously damaged кузовных panels
   Removal and installation of a forward bumper
   Removal and installation of a back bumper
   Removal, installation and cowl adjustment
   Removal and installation drive a cable отпускания the cowl lock
   Removal, installation and adjustment of assemblage of the lock of a cowl
   Removal and installation of doors
   Removal and installation of panels of an internal upholstery of doors
   Removal and installation of door handles and lock components
   Removal and installation of door glasses and regulators Glass lifts
   Removal and installation of a door of a back and its persistent bars
   Removal, installation and adjustment of components of the lock of a door of a back
   Removal and installation of components of the uniform lock
   Removal and installation of components of the electric drive Glass lifts
   Removal and installation of external rear-view mirrors and accompanying components
   Windscreen and glass of a door of a back - the general information
   The top hatch
   Removal and installation of elements кузовной furnish
   Removal and installation of seats
   The mechanism натяжителя a seat belt of a forward seat - the general information
   Removal and installation of components of seat belts
   Removal and installation of elements of furnish of salon
   Removal and installation of the central console
   Removal and installation of the panel of devices
   Control кузовные the sizes
+ Onboard electric equipment
купить iphone 7 plus дешево, tom


Removal and installation of components of seat belts

REMOVAL

Seat belts of forward seats - models without automatic натяжителей belts

 PERFORMANCE ORDER

1. Disconnect a negative wire from the battery.
2. Remove a corresponding forward seat (see Has undressed Removal and installation of seats).
3. Having hooked, remove from the top anchor of a seat belt a decorative cover, then turn out анкерный a bolt and disconnect a belt from a height regulator.

4. Turn out the screw of fastening of the top panel of internal furnish of a door pillar, then hook and remove the panel.

5. In case of need turn out fixing bolts (try to remember an order of installation of washers) and remove the mechanism of a regulator of height of position of an anchor of a seat belt.

6. Having hooked, separate an upper edge of the bottom panel of furnish of a door pillar, then separate the panel from a decorative overlay of a threshold and remove it from the car.

7. Turn out bottom анкерный a seat belt bolt (try to remember an order of installation of washers), then liberate a belt from a threshold and remove with анкерной plates the remote plug.

8. Turn out a bolt of fastening of an inertial drum of the returnable device and remove a seat belt from the car.

Seat belts of forward seats - models with automatic натяжителями belts

 PERFORMANCE ORDER

The prevention resulted in the beginning see Has undressed the Mechanism натяжителя a seat belt of a forward seat - the general information.

1. Execute the procedures described in paragraphs with 1 on 7.

2. Incline forward assemblage of a back seat and accurately liberate from the clamps the panel of an overlay of a threshold of a back door. Having released all clamps, remove the panel from the car. At removal of a seat belt of a driver's seat from the car equipped with a remote drive of unlocking of a door of a back, turn out fixing screws and remove приводной the lever with the decorative panel - in process of access opening disconnect приводной a cable.

3. Give a fastening nut натяжителя on a basic hairpin (it will lead to mechanism switching-off натяжителя), also turn out the forward fixing screw.

4. Remove from a forward part натяжителя an arm and liberate it from a support.

5. Remove a clamp () cable fastenings натяжителя to a body, then give a bolt of fastening of an inertial drum and remove assemblage of a seat belt from the car.


Seat belts of a back seat

 PERFORMANCE ORDER

1. Remove assemblage of a back seat (see Has undressed Removal and installation of seats).
2. Turn out bottom анкерный a bolt of fastening of a seat belt to a floor, remove remote plugs and a washer, established between анкерной a plate of a belt and the floor panel.

3. Delay upwards the back end of an overlay of a threshold for the purpose of its branch from a floor.

4. Separate the basis of the lateral panel of furnish of a back seat from the case, then liberate it from the top support and remove from the car.

5. Liberate a shelf of a luggage space from the support and remove it саля. On models the Versatile person also remove forward section of a shelf.

6. On models where lateral panels of furnish of a doorway of a back are imposed on the top panels of furnish of back racks, remove an overlay of a threshold and the corresponding lateral panel of furnish. For fastening of an overlay of a threshold screws, or clamps are used, - the last are released by extraction from them the central sections. The lateral panel of furnish fastens a unique clip.

7. Remove from a body a sealing tape of an aperture of a back door around edge of the top panel of furnish of a door pillar, then remove the back panel from the top part of a doorway of a back.

8. Turn out forward screws of fastening of the top finishing panel.

9. Accurately remove the handle from the lever отпускания clamps of a back of a back seat.

10. On models the Versatile person uncover access the panel of lateral furnish of a luggage space, then turn out fixing screws and remove the panel from the car. Give the screw of fastening of the panel of a back rack.

11. On all models prop up a back door, then slightly raise a clamp and disconnect a corresponding persistent bar from the spherical hinge.

12. Separate from a body the panel of furnish of a back rack and remove it from the car. Liberate from the panel directing a seat belt, then remove the panel from a belt and take it from the car. At a corresponding complete set, do not forget to disconnect at panel removal electroconducting from the fixture / a back loudspeaker.

13. Turn out a fixing bolt and remove the top anchor of a seat belt.

14. Give bolts of fastening of an inertial drum of the returnable device and remove assemblage of a seat belt from the car.


Buckle of a seat belt of a forward seat

 PERFORMANCE ORDER

1. Remove a seat (see Has undressed Removal and installation of seats).
2. Remove the handle of a regulator of an inclination of a back of a seat, then give a fixing boat (do not forget about a washer) and remove a regulator wheel.
3. Liberate from clamps a first line of the panel of lateral furnish, then will liberate back country of the panel and remove last from the car.
4. Turn out a fixing bolt (do not forget about a washer and the remote plug) and remove a seat belt buckle.


Buckle of a seat belt of a back seat

 PERFORMANCE ORDER

Incline assemblage of a back seat forward, then turn out a corresponding fixing bolt (try to remember adjusting position of a washer and the remote plug) and remove a buckle from the car.

INSTALLATION

 PERFORMANCE ORDER

Installation is made upside-down. Pay attention to following moments:

a) Track correctness of installation on a body of inertial drums. Track, that on анкерные knots have been established all provided washers and-or remote plugs;
b) All fixture tighten with demanded effort;
c) Replace all clamps of fastening of decorative panels damaged in the course of dismantle. Track reliability of fastening of panels and sealing tapes of doorways.