Skoda Felicia

Since 1994 of release

Repair and car operation



Shkoda Felitsija
+ Cars of mark Skoda Felicia
+ The maintenance instruction
+ Routine maintenance
+ Engine repair
+ Systems of cooling, heating
+ The power supply system
+ Engine electric equipment
+ Coupling
+ Transmission
+ Power shafts
+ Brake system
+ Suspension bracket and steering
- Body and salon furnish
   The general information and safety measures
   Care of components of a body and the car bottom
   Care of an upholstery and carpet coverings of salon
   Repair of insignificant damages кузовных panels
   Repair seriously damaged кузовных panels
   Removal and installation of a forward bumper
   Removal and installation of a back bumper
   Removal, installation and cowl adjustment
   Removal and installation drive a cable отпускания the cowl lock
   Removal, installation and adjustment of assemblage of the lock of a cowl
   Removal and installation of doors
   Removal and installation of panels of an internal upholstery of doors
   Removal and installation of door handles and lock components
   Removal and installation of door glasses and regulators Glass lifts
   Removal and installation of a door of a back and its persistent bars
   Removal, installation and adjustment of components of the lock of a door of a back
   Removal and installation of components of the uniform lock
   Removal and installation of components of the electric drive Glass lifts
   Removal and installation of external rear-view mirrors and accompanying components
   Windscreen and glass of a door of a back - the general information
   The top hatch
   Removal and installation of elements кузовной furnish
   Removal and installation of seats
   The mechanism натяжителя a seat belt of a forward seat - the general information
   Removal and installation of components of seat belts
   Removal and installation of elements of furnish of salon
   Removal and installation of the central console
   Removal and installation of the panel of devices
   Control кузовные the sizes
+ Onboard electric equipment



Removal and installation of elements of furnish of salon

Panels of internal furnish

 PERFORMANCE ORDER

1. For fastening of panels of internal furnish of salon screws, screws, and also any clamps and latches are used.
2. Make sure that the next panels are not established внахлест on subject to removal. Usually panels act in film in strictly certain order which becomes quite obvious at attentive survey.
3. Release all revealed clamps and turn out screws of fastening of the panel. If after that the panel does not give in to removal, it is necessary to examine attentively it about revealing of the latent fixture. Usually the fixture settles down along external edge of the panel. For panel clearing it is necessary, moving on its perimetre, accurately to hook edge the suitable tool in which quality big enough screw-driver with a flat sting usually not bad approaches. Operate cautiously, trying not to damage clamps. The clamps broken in the course of dismantle at assemblage should be replaced by the new.

In certain cases for panel removal it is necessary to liberate the sealing tape laid along it.

4. Avoid to make excessive efforts at panel branch. Before make sure that all provided fixture is released also disturbs nothing to removal.
5. Installation is made upside-down. All fixture damaged in the course of dismantle is subject to replacement. In order to avoid development of extraneous noise and vibrations during movement track reliability of fixing of the established panel in all fixing points.


Carpet covering


 PERFORMANCE ORDER

1. The floor of passenger branch of salon of the car is usually covered by the whole carpet which edges are fixed by screws or the clamps similar with used in panels of decorative furnish.
2. Procedure of removal of a carpet covering is simple enough, time of considerable expenses of time in view of necessity of preliminary dismantle various disturbing to performance of procedure of components, such as a seat, the central console, bottom an anchor of seat belts, etc. however demands


Ceiling upholstery

 PERFORMANCE ORDER

1. The ceiling upholstery fastens to a roof of salon by means of clamps and can be removed only after preliminary any dismantle of auxiliary components, like поручневых handles, sun-protection peaks, a windscreen and the fixed glasses of the back window leaves, adjoining panels of furnish, and also sealing tapes of doorways and the sun-protection hatch.
2. It is necessary to notice that dismantle of a ceiling upholstery demands from the executor of certain skills that is why, procedure performance will charge more correctly to experts of car-care centre.