Skoda Felicia

Since 1994 of release

Repair and car operation



Shkoda Felitsija
+ Cars of mark Skoda Felicia
+ The maintenance instruction
+ Routine maintenance
- Engine repair
   + Repair without extraction from the car of the petrol engine of 1.3 l
   - Repair without extraction from the car of the petrol engine of 1.6 l
      The description of the basic knots and mechanisms
      Reduction of the piston of the first cylinder in position of the top dead point (ВМТ) the end of a step of compression
      Check компрессионного pressure - an order of carrying out and interpretation of results
      Removal and installation of a belt of drive ГРМ and its covers
      Removal, check of a condition and installation of cogwheels and натяжителя a belt of drive ГРМ
      Removal, installation and adjustment of effort of a tension of a belt of a drive of auxiliary units
      Removal and installation of a cover of a head of cylinders
      Replacement of an epiploon of a camshaft
      Replacement of epiploons of a cranked shaft
      Removal and installation of a head of cylinders in gathering with the inlet pipeline and a final collector
      Check of serviceability of functioning of hydraulic pushers
      Removal, check of a condition and flywheel installation
      Check of a condition and replacement of support of the power unit
      Removal and pallet installation картера the engine
      Removal and installation of the oil pump and маслозаборника
   + Repair without extraction from the car of the diesel engine
   + Dismantle of the power unit and engine major repairs
+ Systems of cooling, heating
+ The power supply system
+ Engine electric equipment
+ Coupling
+ Transmission
+ Power shafts
+ Brake system
+ Suspension bracket and steering
+ Body and salon furnish
+ Onboard electric equipment



Replacement of epiploons of a cranked shaft

Forward epiploon

 PERFORMANCE ORDER

1. Merge impellent oil.
2. Remove a belt of a drive of auxiliary units (see Has undressed Removal, installation and adjustment of effort of a tension of a belt of a drive of auxiliary units).
3. Remove a pulley of a cranked shaft, external covers газораспределительного a belt, itself газораспределительный a belt and a cogwheel of a cranked shaft.

4. Try to remember depth of landing of an epiploon in the casing. Trying not to damage a casing or a surface of a pin of a shaft, drill in a face surface of an epiploon a small aperture.

5. Screw in an aperture саморез...

... Grasp a screw head flat-nose pliers and take an epiploon from a casing.

6. Without applying any solvents, wipe walls of a casing and a surface of a pin of a shaft pure неворсящейся rags. Remove from working surfaces agnails, teases and the roughnesses, capable to lead to failure of a new epiploon.
7. Wind with an adhesive tape a surface of a pin of a cranked shaft condensed with an epiploon.

8. Grease with pure impellent oil of a sponge of a new epiploon, and press last in an entrance aperture in a casing.

9. The new epiploon should be planted in a casing on the same depth, as the old removed from the engine. Begin to knock an epiploon in a casing by means of a hammer and оправки in which quality the face head approaching on the size or a piece of a pipe of the corresponding diameter can be used.

Оправка should rest only against firm external edge of an epiploon. Alternatively, impose an old epiploon from above on the new.

Then establish a cogwheel and start to tighten gradually its bolt. Continue to tighten a bolt until the new epiploon definitively will not sit down in a casing.

10. Establish into place a cogwheel and a belt of drive ГРМ (Sections Reduction of the piston of the first cylinder in position of the top dead point (ВМТ) the end of a step of compression, Removal and installation of a belt of drive ГРМ and its covers see, Removal, check of a condition and installation of cogwheels and натяжителя a belt of drive ГРМ). Adjust effort of a tension of a belt (see Has undressed Removal and installation of a belt of drive ГРМ and its covers).
11. The further installation is made in an order, the return to a dismantle order. The description of procedures of installation and adjustment of a tension auxiliary drive a belt is resulted in Section Removal, installation and adjustment of effort of a tension of a belt of a drive of auxiliary units. In summary fill in in the engine necessary quantity of engine oil of a demanded grade.


Replacement of a lining of a casing of a forward epiploon

 PERFORMANCE ORDER

1. Execute the procedures described in paragraphs with 1 on 3, then remove the pallet картера the engine (see Has undressed Removal and pallet installation картера the engine).
2. In stages turn out bolts of fastening of a casing of an epiploon to the block of cylinders.
3. Vrashchatelno-progress separate a casing in gathering with an epiploon from the block and remove it from a pin of a cranked shaft.
4. Remove from a casing of an epiploon/block of cylinders an old lining. Carefully smooth out interfaced surfaces of a casing and the block, having removed with all of them traces of a material of an old lining and hermetic traces (necessarily take advantage of a scraper or a penknife). Try not to damage interfaced surfaces.
5. Remove the sealing plug established between a casing of an epiploon and the block. The defective plug replace, before installation slightly having greased new with liquid lubricating oil.
6. Having hooked a strong screw-driver, take from a casing an old epiploon.
7. Carefully wipe a casing and check up it on presence of cracks and signs of deformations. Lay a casing an interfaced surface downwards on a working surface of a workbench. Using in quality оправки wooden брусок, it is perpendicular запрессуйте a new epiploon hammer blows in the landing nest.
8. Grease an interfaced surface of the block of cylinders with universal hermetic and lay on it a new sealing lining.
9. Wind a neck of a cranked shaft with an adhesive tape.
10. Grease internal sponges of an epiploon with pure impellent oil and accurately put on assemblage a shaft pin. Vrashchatelno-progress advance an epiploon along a pin, densely having pressed a casing to a surface of the block of cylinders. Track correctness of interface of the sealing plug planted in a casing with the block.
11. Screw new fixing bolts and in stages tighten them with demanded effort.

Remember that the holder is made of a soft aluminium alloy and can be easily damaged at infringement of uniformity of a tightening of bolts.

12. Establish into place the pallet картера (see Has undressed Removal and pallet installation картера the engine).
13. Establish a cogwheel of a cranked shaft and газораспределительный a belt (Sections Reduction of the piston of the first cylinder in position of the top dead point (ВМТ) the end of a step of compression, Removal and installation of a belt of drive ГРМ and its covers see, Removal, check of a condition and installation of cogwheels and натяжителя a belt of drive ГРМ). Adjust effort of a tension of a belt (see Has undressed Removal, check of a condition and installation of cogwheels and натяжителя a belt of drive ГРМ).
14. Establish a belt of a drive of auxiliary units and adjust effort of its tension (see Has undressed Removal, installation and adjustment of effort of a tension of a belt of a drive of auxiliary units). Fill in in the engine necessary quantity of engine oil of a demanded grade.


Back epiploon

 PERFORMANCE ORDER

1. Merge impellent oil.
2. Remove from the engine a transmission (the Transmission see the Head).
3. Remove a flywheel (see Has undressed Removal, check of a condition and flywheel installation). Remove a disk and assemblage of a basket of coupling (Coupling see the Head).
4. In stages give bolts of fastening of a casing of an epiploon.
5. Vrashchatelno-progress separate a casing in gathering with an epiploon from the block and remove it from a pin of a cranked shaft.
6. The back epiploon varies in gathering with a casing and in an individual order is not delivered. If replaceable assemblage is not equipped by the built in sealing lining, last should be got separately.
7. Carefully smooth out an interfaced surface of the block of cylinders, completely having removed from it all traces of a material of an old lining and hermetic (in case of need take advantage of a scraper or a penknife - try not to damage a surface).
8. Grease an interfaced surface of the block with fresh hermetic of universal type and establish a new lining.
9. Firm epiploons of company Skoda are equipped by the plastic insert protecting sponges of an epiploon from damage about edges шпоночного of a groove at clothing of assemblage on a pin of a shaft. If the insert is not provided, wind a pin of a shaft with an adhesive tape.
10. Grease internal sponges of a new epiploon with pure impellent oil and vrashchatelno-progress plant assemblage on a shaft pin.
11. Screw new fixing bolts and in stages tighten them with demanded effort.

Remember that the holder is made of a soft aluminium alloy and can be easily damaged at infringement of uniformity of a tightening of bolts.

12. Establish into place the pallet картера (see Has undressed Removal and pallet installation картера the engine).
13. Establish a flywheel (see Has undressed Removal, check of a condition and flywheel installation), then a frictional disk and assemblage of a basket of coupling (Coupling see the Head).
14. Establish into place a transmission (the Transmission see the Head).
15. In summary fill in in the engine necessary quantity of engine oil of a demanded grade.