Skoda Felicia

Since 1994 of release

Repair and car operation



Shkoda Felitsija
+ Cars of mark Skoda Felicia
+ The maintenance instruction
+ Routine maintenance
+ Engine repair
+ Systems of cooling, heating
+ The power supply system
+ Engine electric equipment
+ Coupling
+ Transmission
+ Power shafts
+ Brake system
- Suspension bracket and steering
   The general information and safety measures
   Removal and installation ступичных assemblages of forward wheels
   Replacement of bearings of forward wheels
   Removal and installation of racks of a forward suspension bracket
   Major repairs of racks of a forward suspension bracket
   Removal, major repairs and installation of the bottom levers of a forward suspension bracket
   Replacement of spherical support of the bottom levers of a forward suspension bracket
   Removal and installation of the stabilizer of cross-section stability of a forward suspension bracket
   Removal and installation of racks of a bar of the stabilizer of cross-section stability of a forward suspension bracket
   Removal and installation of a forward stretcher
   Replacement of bearings of back naves
   Removal, major repairs and installation of racks of a back suspension bracket
   Major repairs of racks of a back suspension bracket
   Removal, major repairs and installation of pins of the back bridge
   Removal and installation of the back stabilizer of cross-section stability
   Removal and installation of the back bridge
   Removal and steering wheel installation
   Removal and installation of a steering column
   Major repairs of a steering column
   Removal and installation of assemblage of the lock of ignition/blocking of a wheel
   Removal, major repairs and installation of the steering mechanism
   Replacement of rubber protective covers картера the steering mechanism
   Removal of air stoppers from a hydraulic path of system of strengthening of a wheel
   Removal and installation of the helmsman наcоса
   Removal and installation of external tips of steering draughts
   Removal and installation of steering draught
   Corners of installation of wheels of the car - the general information
+ Body and salon furnish
+ Onboard electric equipment



Removal and installation of a forward stretcher

At assemblage new nuts of racks of the stabilizer of cross-section stability, and also a nut of spherical fingers will be necessary.

REMOVAL

 PERFORMANCE ORDER

1. Prop up wedges back wheels, firmly cock a lay brake, then поддомкратьте redock of the car and establish it on props. Remove both lobbies of a wheel.
2. Remove a reception pipe and каталитический the converter of system of release of the fulfilled gases (the Part Dismantle of the power unit and major repairs of the engine of the Head engine Repair see).
3. Remove the stabilizer of cross-section stability (see Has undressed Removal and installation of the stabilizer of cross-section stability of a forward suspension bracket).
4. Remove both bottom levers of a suspension bracket (see Has undressed Removal, major repairs and installation of the bottom levers of a forward suspension bracket).
5. Turn out coupling bolts of collars of support картера the steering mechanism. Remove collars from a stretcher.
6. Give a nut and take a through bolt of fastening of a back support of a suspension bracket of the power unit.
7. Track, that all cables fixed on a stretcher and hoses have been liberated from clamps and taken aside.
8. Get under a stretcher a jack with laid on its head wooden бруском.
9. Turn out bolts of fastening of a stretcher, accurately lower assemblage on a jack and take it from under the car. Track, that in the course of extraction the stretcher did not cling to tubes of lines of system of hydrostrengthening of a wheel.

INSTALLATION

 PERFORMANCE ORDER

Installation is made upside-down. It is necessary to give special attention to following moments:

a) Fixing bolts should be tightened strictly with demanded effort;
b) Before installation of collars track correctness of placing of rubber pillows of support of the steering mechanism (plugs should nestle on a stretcher the flat party). A carving of fixing bolts smooth out, then grease with fixing hermetic of type Loctite 270. A tightening of bolts make with demanded effort;
c) Installation of the bottom levers and the stabilizer of cross-section stability make according to the instructions resulted in Sections Removal, major repairs and installation of the bottom levers of a forward suspension bracket, Removal and installation of the stabilizer of cross-section stability of a forward suspension bracket;
d) the Order of installation of system of release of the fulfilled gases is resulted in the Part Dismantle of the power unit and major repairs of the engine of the Head engine Repair;
e) In summary do not forget to check up geometry of a forward suspension bracket (see Has undressed Corners of installation of wheels of the car - the general information).