Skoda Felicia

Since 1994 of release

Repair and car operation



Shkoda Felitsija
+ Cars of mark Skoda Felicia
+ The maintenance instruction
+ Routine maintenance
+ Engine repair
+ Systems of cooling, heating
+ The power supply system
+ Engine electric equipment
+ Coupling
+ Transmission
+ Power shafts
+ Brake system
- Suspension bracket and steering
   The general information and safety measures
   Removal and installation ступичных assemblages of forward wheels
   Replacement of bearings of forward wheels
   Removal and installation of racks of a forward suspension bracket
   Major repairs of racks of a forward suspension bracket
   Removal, major repairs and installation of the bottom levers of a forward suspension bracket
   Replacement of spherical support of the bottom levers of a forward suspension bracket
   Removal and installation of the stabilizer of cross-section stability of a forward suspension bracket
   Removal and installation of racks of a bar of the stabilizer of cross-section stability of a forward suspension bracket
   Removal and installation of a forward stretcher
   Replacement of bearings of back naves
   Removal, major repairs and installation of racks of a back suspension bracket
   Major repairs of racks of a back suspension bracket
   Removal, major repairs and installation of pins of the back bridge
   Removal and installation of the back stabilizer of cross-section stability
   Removal and installation of the back bridge
   Removal and steering wheel installation
   Removal and installation of a steering column
   Major repairs of a steering column
   Removal and installation of assemblage of the lock of ignition/blocking of a wheel
   Removal, major repairs and installation of the steering mechanism
   Replacement of rubber protective covers картера the steering mechanism
   Removal of air stoppers from a hydraulic path of system of strengthening of a wheel
   Removal and installation of the helmsman наcоса
   Removal and installation of external tips of steering draughts
   Removal and installation of steering draught
   Corners of installation of wheels of the car - the general information
+ Body and salon furnish
+ Onboard electric equipment


Removal of air stoppers from a hydraulic path of system of strengthening of a wheel

 PERFORMANCE ORDER

1. Necessity for carrying out of the given procedure arises only after a detachment of components of a hydraulic path.
2. Uncover a jellied mouth of the tank of the steering pump and add necessary quantity of a fresh hydraulic liquid of a demanded grade.
3. At the muffled engine some times slowly turn a steering wheel from an emphasis against the stop for the purpose of removal of air which has got to system, then once again check up liquid level. In case of need make corresponding updating.
4. Return a steering wheel in rectilinear position, then start the engine, allow to it to work within nearby 5 seconds on single turns, then again muffle.
5. Once again check up level of a hydraulic liquid, in case of need make updating, then restart the engine. Some times slowly turn a steering wheel from an emphasis against the stop. Repeat procedure performance until in the tank allocation of bubbles will not stop.

Do not keep a steering wheel of 15 seconds turned out against the stop more in order to avoid damage of the steering mechanism!

6. If at steering wheel rotation hydraulic lines publish unusual noise, hence in a path air continues to remain. For check turn a wheel in rectilinear position and muffle the engine and if liquid level in the tank raises, hence air takes place also "prorolling" it is necessary to continue.
7. Completely having removed air, muffle the engine and allow to system to cool down, then once again check up liquid level, in case of need make updating.