Skoda Felicia

1. Поддомкратьте redock of the car also establish it on props.
2. Check up pillows of support of a suspension bracket of the power unit on presence of cracks, signs of hardening of a material, отслоений rubbers from a metal basis of other damages. Defective support are subject to replacement.
3. With the help динамометрического a key check up correctness of efforts of a tightening of carving connections of support.
4. Using as the lever the big screw-driver or mount, estimate degree of deterioration of support (in case of need take advantage of the help of the assistant). In case of revealing excessive люфта replace the worn out components, preliminary having made sure of reliability of a tightening of fixture.

The rubber pillow of the right support is built in in the case of the water pump. Pillow extraction is made by means of a hydraulic press, or a set бородков with remote plugs. Performance of the given work will charge more correctly to experts of a workshop of car-care centre.

The pillow of the left support is built in in a face cover картера transmissions and can be taken in a workshop of the firm service-centre of company Skoda by means of a special stripper.

1. The lever support of a back suspension bracket is equipped by two rubber торсионными the inserts, one of which (main) запрессована in an arm fixed on a back wall картера РКПП, the second, the smaller size the rubber plug, запрессована in a back part of a side scene of a stretcher of a forward suspension bracket. Replacement of rubber components of a support is made in the conditions of a car-care centre workshop as for its performance special adaptations are required.

2. For extraction main торсионной inserts prop up the power unit the second jack (for the purpose of loading distribution lay between a head of a jack and the pallet картера wooden брусок). Remove a nut and a through bolt of fastening of a support to a stretcher side scene. Give two bolts and a nut (on models of last years of release - three nuts) support fastenings to картеру transmissions and remove assemblage of a support from the car.

3. For side scene removal give a nut of fastening of its back part to a basic arm on a stretcher, take a through bolt with a washer. Then give a nut and take a through bolt of fastening of a side scene to an arm of the main support. Remove a side scene and take it from under the car.
4. Installation is carried out upside-down. Track observance of efforts of a tightening of fixture.