Skoda Felicia

Since 1994 of release

Repair and car operation



Shkoda Felitsija
+ Cars of mark Skoda Felicia
+ The maintenance instruction
+ Routine maintenance
- Engine repair
   - Repair without extraction from the car of the petrol engine of 1.3 l
      The description of the basic knots and mechanisms
      Check of a condition of shatunno-piston group on hearing and measurement компрессионного pressure in cylinders
      Reduction of the piston of the first cylinder in position of the top dead point (ВМТ)
      Removal and installation of a cover of a casing of a camshaft
      Removal, check of a condition and installation of assemblage of an axis коромысел
      Removal and installation of a head of cylinders in gathering with the inlet pipeline and a final collector
      Removal, check of a condition and installation of a forward cover, chain and asterisks of drive ГРМ
      Removal, check of a condition and installation of components of the oil pump
      Removal and pallet installation картера the engine
      Replacement of epiploons of a cranked shaft
      Removal, check of a condition and flywheel installation
      Check of a condition and replacement of rubber pillows of support of a suspension bracket of the power unit
      Removal, installation and adjustment of effort of a tension of a belt of a drive of auxiliary units
   + Repair without extraction from the car of the petrol engine of 1.6 l
   + Repair without extraction from the car of the diesel engine
   + Dismantle of the power unit and engine major repairs
+ Systems of cooling, heating
+ The power supply system
+ Engine electric equipment
+ Coupling
+ Transmission
+ Power shafts
+ Brake system
+ Suspension bracket and steering
+ Body and salon furnish
+ Onboard electric equipment



Removal and installation of a cover of a casing of a camshaft

REMOVAL

 PERFORMANCE ORDER

1. Disconnect a negative wire from the battery.
2. Disconnect ventilating hoses from a jellied mouth of impellent oil on a cover of a head of cylinders.

3. Give two nuts of fastening of a cover of a head of cylinders and take rubber loose leaves.

4. Uncover heads of cylinders and accurately liberate from a landing flute a sealing lining. Check up a lining condition.

INSTALLATION

 PERFORMANCE ORDER

1. Carefully smooth out an interfaced surface of a head of cylinders and a flute under lining installation in its cover. Oil traces should be completely removed. Fill a lining in a flute on a cover, having tracked correctness of its packing on all length.

2. Watching that the lining has not jumped out of a flute, establish a cover on a head of cylinders. Fill rubber loose leaves and screw on hairpins fixing nuts. Tighten nuts with demanded effort.

3. Connect to a jellied mouth of impellent oil ventilating hoses, strongly having fixed their collars of screw or worm type.

4. In summary connect a negative wire to the battery. Start the engine and check up it on presence of signs of leaks of oil.








На www.seafood-krsk.ru морепродукты Красноярск.